What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 02.07.2025 05:34

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This is where this question deviates from being a 'generic' question, and becomes more specific.

What does a fuse do?

What is lightning?

Is it mandatory for restaurants to wash glasses after every use?

a photo is worth a thousand words.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is where the MOV conducts again, and dissipated the energy.

How long did it take you to get used to your CPAP machine?

Now when you have a certain ac resistance, then a current flows in a loop.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Upvotes:

When will dating stop being so hard for Gen Z?

I post the exact comment here.

what exactly is a ‘surge’ protector?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

What do you do when your family doesn’t care about you?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

An AC voltage/ current source, and an ac inductive load.

Is it true that most Indian men are gay and they just hide their feelings?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

[old diagram got deleted by accident]

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Inside J.J. Spaun's Arizona Home as He Claims Surprising U.S. Open Win - Realtor.com

This is the picture of an electronic coil of wire wound around a core of magnetic material.

This is 'the assistant's answer'

It also is a device that limits the change in current flow.

Why is only the left side of my vagina bleeding, on and off?

These devices are installed between the “hot” and “neutral” and protective ground.

but this device (an Inductor) … impedes the rapid changes in the current.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

PlayStation gamers ‘worried’ about Xbox’s newly announced console - GAMINGbible

There are three different concepts here that are getting confused.

So, the voltage could go up to 500 volts, and the fuse will not open up.

eight

Why is digital marketing important?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

There are two important concepts here.

GameStop may be a bitcoin play, but its stock is sliding on weaker-than-expected Q1 revenue - MarketWatch

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

(Dc diagram shown, AC is similar).

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Barbra Streisand on New Album, Not Being Paid Enough for Meet the Fockers - Variety

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

nine

the problem then depends on "how fast does the fuse operate?".

Adam Scott, nearly 45 years old, with chance to redefine career on U.S. Open Sunday - NBC Sports

The third is lightning and “how it gets conducted into a home.”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

One

Darwin Loved Worms. They May Have Just Proved Him Wrong About Evolution. - Yahoo

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Barnstars:

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

He then describes Rainy Season and Lightning.

In schematic diagrams this is the symbol for a fuse:

A circuit breaker is similar, but is resettable.

At least they know the answer if they wanted it.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

At one ohm, the resistor has a maximum of 1 watt power.

For this case there are devices called Metal oxide varistors (MOV).

Because the load is inductive, the current lags the voltage.(by a bit).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

The MOV will conduct when the voltage exceeds 50% of line voltage.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

He then describes the function of a fuse.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

2024–10–16 [ OO OLAOYE OYEBODE ]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

One is “what exactly is in a ‘surge protector’ ? ”

This one hit behind the barn.

2024–10–14 [Omar Gharbi Omar Gharbi ]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

These are simplified answers to the original question, and does not change anything I wrote above.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

But… the neutral is now “floating” because of the 1 ohm resistance.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[image of Common-mode choke]

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

He then asserts :

First Sentence:

Edit 2024–10.

This device then solves the entire problem.

The bolt then partially travels down the line to your home.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

but I think this circuit , shows a few more pieces.

It seems Mohan does not understand the difference between a comment and an Answer.

so, what happens?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

The other is “what does a “fuse” do?”

Here is a simplified AC power diagram.

A fuse is a non-resetable over current circuit protector.

But it can get overloaded, and no longer works.

2024–10–10[John johnson John Johnson ]